• Microprocessor based servo controlled temperature system.
• Control modes: Air mode and baby skin mode.
• Humidity control and oxygen concentration control system.
• Humidity control by LCD.
• Temperature control by LCD.
• Oxygen control by LED.
• Self-testing function, various failure alarms by audible and visual.
• >37°C temperature set function.
• Embedded integrated sensor module.
• Triple protection for over temperature with separate cut off device, more safety system.
• The inclination of infant bed is adjustable.
• Double wall hood, 4 operating windows and 2 iris ports.
• Independent locking device for front door.
• RS232 connector, Oxygen inlet.

• Power supply : 110/220V  60/50Hz.
• Power input :  650VA.

Operating Conditions

• Environment temperature: 20°C~30°C.
• Environment relative humidity: 30%~75%RH.
• Environment air velocity of flow: <0.3m/s.
• Air Temperature control range: 25°C~38°C.
• Skin temperature control range: 32°C~38.5°C.
• Humidity display range: 0% -100%RH.
• Humidity control range: 40% -95%RH.
• Oxygen concentration display range: 0% ~100% .
• Oxygen concentration measure accuracy:  ± 2% (After calibration).
• Oxygen concentration setting range: 20% ~60% .
• Oxygen concentration control accuracy: ±4%.
• Oxygen concentration deviation alarm: ±5%.
• Skin temperature sensor accuracy: +0.3°C.
• Temperature fluctuation: +0.5°C.
• Uniformity of mattress temperature: ≤0.8°C.
• Warm-up time: ≤45min.
• Internal noise level: ≤55dB (A).
• Infant bed tilt angle : +10º.
• Mattress size: 65cm(L) x 37cm(W).
• Trough capacity: 1200ml.
• Air filter: 0.5um.

• Temperature control and humidity control by LCD.
• Double wall hood.
• Trough for pulling and pushing ,which is convenient to add the water and wash.
• Fan with low noise and long life-span.
• Temperature deviation and over temperature could be amended in front panel directly.
• A second thermal cut-out function for more safety.
• The infant bed inclination angle is adjustable.
• Six operating windows.two side access operating windows can be swiveled.
• 4 drawers for easy storage.

Standard Configurations

• Main body (including the Transparent hood, Control system, Infant bed,Water trough) , I.V.pole, Mattress, Drawers, Castors.

Optional Parts

• Double Wall Hood
• X Ray Cassette & Integrated scale.
• Upside LED phototherapy unit BL-30D.
• Downside LED phototherapy unit BL-100.
• Air/Oxygen Blender.
• Electronic Elevator.

Package

• Each unit is packed in two wooden crate:
• (control unit and cabinet): 112 x 66 x 99 cm.
  N. W.: 70 Kg G.W.:100 Kg.
• Hood: 98 x 63 x 75 cm.
  N. W.:20 kg G.W.:30kg.

Transport and Storage

• Environment Temp: -10°C- -+ 70°C
• Environment Relative Humidity: ≤ 80%
• Atmospheric Pressure: 500 ～ 1060hPa